1131   

Road Roller

 　 1.Make a light crease along the dotted line with the back of knife for easy folding. 　 2.Cut off each part according to numerical number. 　 3.Fold down #5 as shown. 　 4.Glue #1 to #5. 　
Difficult ☆☆★★ Easy
　 　 　 　 　 　 　 　 　 　 　
　 　 　 　 　 　
　 5.The head is done. 　 6.Put round pencil above #10 and roll over. Same with #11. 　 7.Glue two edges of #10 together into a cylinder. 　 8.Repeat the same procedure with #11. 　 9.Glue #2 & #3 to both ends of #10. 　
　 　 　 　 　 　 　 　 　 　 　
　 　 　 　 　 　
　 10.Glue #2 & #3 to both ends of #11. 　 11.Fold down #9 as shown. 　 12.Glue the edges of #9 together as shown. 　 13.Glue one roller to #9 as shown. 　 14.Glue #9 to the rear lower part of the head as shown. 　
　 　 　 　 　 　 　 　 　 　 　
　 　 　 　 　 　
　 15.Fold down #8  & glue it together as shown. 　 16.Fold down #6 as shown. Same with #7. 　 17.Glue #7 to #8 as shown. 　 18.Glue #6 to the other end of #8. 　 19.Glue the front roller #10 to #6 & to #7 as shown. 　
　 　 　 　 　 　 　 　 　 　 　
　 　 　 　 　 　
　 20.Glue #8 to the front lower part of the head as shown. 　 21.Done. 　 22.Finish. 　 23.View from the other side. 　 24.View from the bottom.