Chiang Kai-Shek Memorial Hall . Taipei 　

As the late President Chiang Kai-Shek passed away on April 5, 1975, all the people of Taiwan were mournful with grief. Accepting the suggestions of various circles and resolved by the funeral committee of that time , Executive Yuan decided to establish Chiang Kai-Shek Memorial Hall in Taipei City so as for all the Taiwan  people to cherish the memory of the leader forever.

  

　 　 　 　 　
　 　 　 　 　 　

1007  

 Chiang Kai Shek Memorial

 　 1.Make a light crease along the dotted line with the back of knife for easy folding. 　 2.A close look of step 1. 　 3.Cut off each part according to numerical number. 　 4.Fold down the eaves #5 and glue two edges together. 　
Difficult ☆★★★ Easy
　 　 　 　 　 　 　 　 　 　 　
　 　 　 　 　 　
　

5.Fold down the corner of eaves #5 as shown.

 　 6.Detail of eaves corner. 　 7.Glue two edges of the octagonal pillar #6 together. 　 8.Glue two edges of the main structure #10 together. 　 9.Glue the pillar #6 to the top of main structure #10. 　
　 　 　 　 　 　 　 　 　 　 　
　 　 　 　 　 　
　

10.Glue #7 to #11 into a complete lower eaves.

　 11.Insert the complete lower eaves into the octagonal pillar #6. 　 12.Done.  　 13.Glue #8 to #12 into complete upper eaves. 　 14.Insert the complete upper eaves into the octagonal pillar #6. 　
　 　 　 　 　 　 　 　 　 　 　
　 　 　 　 　 　
　 15. Glue the roof #5 to the top of octagonal pillar #6. 　 16.Fold down the outwalls #1~#4. 　 17.Glue the edge of each outwall as shown. 　 18.4 outwalls are done. 　 19.Glue each outwall to the right position of the main structure #10. Use tweezers to hold on the combined parts. 　
　 　 　 　 　 　 　 　 　 　 　
　 　 　 　 　 　
　

20.Use tweezers to hold the inscribed board #9 & glue it to the main structure.

　 21.Put round pencil above #13 and  roll over. 　 22. Glue two edges of #13 together. 　 23.Glue #13 to #14. 　 24.Glue #13 to the top of  roof. 　
　 　 　 　 　 　 　 　 　 　 　
　 　 　 　 　 　 　 　 　
　

25.Use tweezers to fold up each corner.

 　

26.Finish.